Service
294 SICAM RTUs, User Manual SICAM CMIC
DC8-001-2.09, Edition 08.2016
6.3.2 SICAM TOOLBOX II
6.3.2.1 Connection Possibilities for the Diagnosis
For the access to the diagnosis data of SICAM CMIC, an online connection of the engineering
PC to the target device is required. Reading access is at the same time possible locally and
from the distance. Writing access (example: startup request to the target device) is only exclu-
sively possible.
You find the basic connection possibilities in section 3.7.1, SICAM TOOLBOX II. Following
you find some application examples.
Direct connection
Revision:
-232
To Next Page
Loading...
Need help?
General
