Engineering via SICAM WEB
SICAM RTUs, User Manual SICAM CMIC 267
DC8-001-2.09, Edition 08.2016
5.3.4 Firmware Update
With this function you are able to load the most recent firmwares into the target device.
Select thereto the submenu Update firmware .
You have the possibility to abort the procedure.
• Click Select a file in order to open the selection dialog
• Select the source directory and the source file (the file type must be *.bin)
• Click on the button
The target device starts the loading procedure. The duration of the loading procedure de-
pends on the file size and the used communication connection.
The file is now checked upon validity. If the data is valid, it is written on the SD card of the tar-
get device. Otherwise, an error information is displayed.
After successful upload the following dialog appears:
• Click on the button
To Next Page
Loading...
