Siemens SICAM CMIC User Manual

Service
312 SICAM RTUs, User Manual SICAM CMIC
DC8-001-2.09, Edition 08.2016
6.5 Firmware Update
In SICAM CMIC, a new system element or the functionality of a system element can be up-
dated in need. For each system element, an individual loadable firmware is provided. You find
information thereto in section 3.3, Loadable Firmwares.
For the accomplishment of firmware updates different methods are possible:
• Engineering via SICAM TOOLBOX II
─ online
─ offline
• Engineering via SICAM WEB
─ online
─ offline
6.5.1 SICAM TOOLBOX II
The SICAM TOOLBOX II contains after its installation all current firmware revisions (based on
the date of issue of the installed version).
Procedure for the Update of System Elements
6.5.1.1 Interrogation of the Firmware Revision
The firmware revisions of all configured system elements (master control element, peripheral
element, protocol elements) can be displayed and printed with the tool "Revision Interrogation
and Display" for a selected automation unit.
You find further details on the tool in the SICAM TOOLBOX II Online Help, chapter "Service
Programs", section "Revision Interrogation and Display".
interrogate firm-
ware revision
new firmware
available
import master
data
update target
system
load
firmware
master data
update
revision
interrogation
selection AU
Save firmware file on
TOOLBOX PC
select firmware file to
be imported
selection AU
open
start import
load

Siemens SICAM CMIC Specifications

General

Brand	Siemens
Model	SICAM CMIC
Category	Remote Control
Language	English