Installation
SICAM RTUs, User Manual SICAM CMIC 45
DC8-001-2.09, Edition 08.2016
1.9 SD Card
For the storage of firmware, application and diagnosis data SICAM CMIC uses an SD Card
(Secure Digital), which is inserted in the front of the device.
You find further information in section 3.5, SD Card.
Note
SICAM CMIC is supplied with SD Card inserted.
Removing or inserting the SD card (if needed) is allowed only in the de-energized device.
1.9.1 Inserting the SD Card
1. Insert the SD Card as shown in the picture (the contacts of the SD Card are facing
towards the right side of the device, the beveling is above and directed toward the front).
2. Push the SD Card carefully into the guide until it engages.
1.9.2 Removing the SD Card
1. Push the SD Card approx. 1…2 mm into the guide.
As a result it is disengaged and springs out of the guide a few millimeters.
2. The SD Card can now be removed.
F4F3F2F1
RY
ER
RS-232
OH2
OH3
SD
X4
To Next Page
Loading...
Need help?
General
