Service
286 SICAM RTUs, User Manual SICAM CMIC
DC8-001-2.09, Edition 08.2016
6.1.2.4.4 Alarms
After opening the list, the most recent entry is automatically selected.
In the header you can see which entry you have selected and the amount of all entries.
In the submenu Alarms alarms are displayed in
chronological order (most recent entry first).
In the header you can see which entry you have
selected and the amount of all entries.
After opening the list, the most recent entry is
automatically selected.
You can navigate through the entire list via function keys <▼> and <▲>
In the selected entry you can see detailed information on the selected entry (date,
timestamp, etc.).
Using the function key <TOP>, you go to the beginning of the list (and select the first entry).
The oscillating function key <TOP> shows that a new alarm is active.
• Press the oscillating function key <TOP> to refresh the entire list
The function key <TOP> will not be oscillating, if you did select the first entry and a new
alarm occurs. In this case, however, the list will be refreshed.
Submenu Submenu Display/settings Meaning/range
3.2
Alarms
– Alarm name Freely definable text (applies
for process alarms)
Always beginning with “Dia”
(applies for diagnosis alarms)
Status
• Freely definable text (ap-
plies for process alarms)
• Coming (applies for diag-
nosis alarms)
*)
*)
no historical alarms
F4F3F2F1
Alarms 0001/0005
Dia Warnin
g
comin
g
ESC TOP
Dia ExtError comin
g
Dia BoardFail comin
g
Dia ComError comin
g