Install Security Certificate
388 SICAM RTUs, User Manual SICAM CMIC
DC8-001-2.09, Edition 08.2016
E.1 General
During establishing the HTTPS connection from a web server to a SICAM CMIC there is a
check if the corresponding security certificate is installed. If it is missing, the browser displays
a certificate warning and you have to install the offered SCIAM RTUs certificate manual.
Among other things the certificate contains the set IP-address and the SICAM RTUs serial
number.
The following installation procedure must be done only once per PC/browser for each SICAM
RTUs IP-address. If the IP-address or serial number of a SICAM RTUs changes (replace-
ment), respectively a different PC or browser is used, then you must install the certificate
again.
The installation procedure is shown for following operation systems:
• Microsoft Windows XP ®
• Microsoft Windows 7 ®
To Next Page
Loading...
Need help?
General
