Siemens SICAM CMIC - SICAM CMIC as Telecontrol Substation with Integrated Switch for External; SICAM CMIC as Telecontrol Substation with Integrated Switch for External System Connection

Use Cases
398 SICAM RTUs, User Manual SICAM CMIC
DC8-001-2.09, Edition 08.2016
F.3 SICAM CMIC as Telecontrol Substation with Integrated
Switch for External System Connection
Features:
• Communication with the control system via IEC 60870-104
(Ethernet-Interface, X1 or X4, can be set with parameter)
• Communication with the external system via IEC 60870-104
(Ethernet-Interface, X1 or X4, can be set with parameter)
• SICAM CMIC is used as switch between control system and external system
• 1 IP address
• 1 subnet mask
• 1 default router
• Parameter Network settings | IP adress | Mode of Ethernet Ports = 1 IP
address (connected ports in switch mode)
Substation Zone
Office Zone
Control Center Zone
SICAM CMIC
X4
X1
Router
Control Center
IP-address: 172.16.0.4
Subnet mask: 255.255.0.0
Default router: 172.16.0.254
PREx / ET84
IP-address: 172.16.0.3
Subnet mask: 255.255.0.0
Default router: 172.16.0.254
IP-address: 172.17.0.22
Subnet mask: 255.255.0.0
IP-address: 172.16.0.254
External
device