Siemens SICAM CMIC - Locking Hook; Type Plate

Installation
SICAM RTUs, User Manual SICAM CMIC 23
DC8-001-2.09, Edition 08.2016
At the back is the DIN rail mounting.
1.1.1 Locking Hook
The device is locked onto the DIN rail and also removed again using the locking hook.
Details see section 1.3.6, Installation of the Device.
1.1.2 Type Plate
On the left side of the housing resides the type plate with specific information as power con-
sumption, order number, serial number, hardware address for the network operation (MAC
address).
Symbol Bedeutung
CE conformity
Protection class II /
protective insulation
The documentation
must be observed
U
= 1,2 A - 0,6 A
SIEMENS
SICAM CMIC
= 18 V - 70 V
I
max
Input:
Made in Germany
www.siemens.com/sicam
00-00-00-00-00-00
6MF21010AB100AA0DE BF0000000000