Engineering via SICAM WEB
SICAM RTUs, User Manual SICAM CMIC 163
DC8-001-2.09, Edition 08.2016
5.1.8 Decentral Archiving
• Menu Home | Settings
The decentralized archive serves for the local storage of events of a substation, and - when-
ever necessary - for the transmission to the control system. By means of that, it is for instance
possible to recover the archive of a control system after a communication fault.
The configuration of the archive resides in the directory tree under
SICAM CMIC | Master module | Decentral archiving
(the checkbox Show all parameters must be activated).
All the data points that are recorded in the event list, are simultaneously recorded in the
decentral archive. The definition thereto resides in the signal parameterization (see 5.1.9.2.1,
Configurable Logging and Display of Signal States).
During operation, the data points to be recorded are archived chronologically upon status
change. This applies for all commands and binary information items of the send and receive
direction.
You find the detailed information on the settings in the manual SICAM RTUs Common Func-
tions System and Basic System Elements, chapter "Telecontrol", section "Decentralized Ar-
chiving".
Note
The data records of the decentral archive are registered in configurable files. The files are stored on the
SD card. The record of data points is therefore only possible with equipped SD card.
Memory Configuration Archive
With the help of this parameter it is possible to select the configuration of the archive stored
on the SD card. You may select this parameter referring to your field of application. The
smaller the bandwidth of your communication line is the smaller the separated files should be.
To Next Page
Loading...
Need help?
General
