Preface
6 SICAM RTUs, User Manual SICAM CMIC
DC8-001-2.09, Edition 08.2016
Notes on Safety
This manual does not constitute a complete catalog of all safety measures required for operat-
ing the equipment (module, device) in question because special operating conditions might
require additional measures. However, it does contain notes that must be adhered to for your
own personal safety and to avoid damage to property. These notes are highlighted with a
warning triangle and different keywords indicating different degrees of danger.
Danger
means that death, serious bodily injury or considerable property damage will occur, if the appropriate pre-
cautionary measures are not carried out.
Warning
means that death, serious bodily injury or considerable property damage can occur, if the appropriate pre-
cautionary measures are not carried out.
Caution
means that minor bodily injury or property damage could occur, if the appropriate precautionary measures
are not carried out.
Note
is important information about the product, the handling of the product or the respective part of the docu-
mentation, to which special attention is to be given.
Qualified Personnel
Commissioning and operation of the equipment (module, device) described in this manual
must be performed by qualified personnel only. As used in the safety notes contained in this
manual, qualified personnel are those persons who are authorized to commission, release,
ground, and tag devices, systems, and electrical circuits in accordance with safety standards.
To Next Page
Loading...
Need help?
General
