765Menu Macros
Chapter 16 Macros
4
Create an event (carry out the menu operation you want to record as an
event in the menu macro).
For details of menus that can be recorded, see page 760.
• When auto insert mode (see page 731) is on, carrying out a menu
operation automatically saves the event in a menu macro.
• When auto insert mode is off, skip to step 5.
5
When auto insert mode is off, press [Insert Before] or [Insert After] to save
the event.
6
Repeat steps 4 and 5, to record the required events in the menu macro.
7
Press the [Store] button.
The numeric keypad window appears.
8
Enter the menu macro register number as required, and press [Enter].
The menu macro is saved with the specified number.
The menu returns to the state in step 1.
To set a pause duration
During menu macro editing, use the following procedure.
1
Enter the pause duration with the knob.
2
Press [Pause Set].
• When auto insert mode (see page 731) is on, this sets the pause duration,
and inserts the pause event.
• When auto insert mode is off, use the same operations as in step 5 of
“Creating a new menu macro” (page 764) to save the event.
Editing a menu macro
To edit the content of a menu macro, use the following procedure.
1
In the Macro >Menu Macro Register >Recall & Run menu, select the
desired register on the menu macro register list.
For details of the menu macro register list, see “Recalling a Menu Macro
Register” (page 761).
Knob Parameter Adjustment Setting values
4 Pause Time (Sec) Pause duration 0.1 to 99.9 (sec)
To Next Page
Loading...
