EasyManuals Logo

ST STM32F2 User Manual

ST STM32F2
1371 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #449 background imageLoading...
Page #449 background image
UM1940
HAL RCC Generic Driver
DocID028236 Rev 2
449/1371
RCC_MCODIV_1
RCC_MCODIV_2
RCC_MCODIV_3
RCC_MCODIV_4
RCC_MCODIV_5
MCO Index
RCC_MCO1
RCC_MCO2
Oscillator Type
RCC_OSCILLATORTYPE_NONE
RCC_OSCILLATORTYPE_HSE
RCC_OSCILLATORTYPE_HSI
RCC_OSCILLATORTYPE_LSE
RCC_OSCILLATORTYPE_LSI
PLLP Clock Divider
RCC_PLLP_DIV2
RCC_PLLP_DIV4
RCC_PLLP_DIV6
RCC_PLLP_DIV8
PLL Clock Source
RCC_PLLSOURCE_HSI
RCC_PLLSOURCE_HSE
PLL Config
RCC_PLL_NONE
RCC_PLL_OFF
RCC_PLL_ON
PLL Configuration
__HAL_RCC_PLL_ENABLE
Notes:
After enabling the main PLL, the application software
should wait on PLLRDY flag to be set indicating that
PLL clock is stable and can be used as system clock
source. The main PLL can not be disabled if it is used
as system clock source The main PLL is disabled by
hardware when entering STOP and STANDBY modes.
__HAL_RCC_PLL_DISABLE
__HAL_RCC_PLL_CONFIG
Description:

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ST STM32F2 and is the answer not in the manual?

ST STM32F2 Specifications

General IconGeneral
BrandST
ModelSTM32F2
CategoryMicrocontrollers
LanguageEnglish

Related product manuals