ST STM32F2

HAL RTC Extension Driver
UM1940
496/1371
DocID028236 Rev 2
__HAL_RTC_CALIBRATION_OUTPUT_DISABLE
Description:
Disable the calibration output.
Parameters:
__HANDLE__: specifies the
RTC handle.
Return value:
None
__HAL_RTC_CLOCKREF_DETECTION_ENABLE
Description:
Enable the clock reference
detection.
Parameters:
__HANDLE__: specifies the
RTC handle.
Return value:
None
__HAL_RTC_CLOCKREF_DETECTION_DISABLE
Description:
Disable the clock reference
detection.
Parameters:
__HANDLE__: specifies the
RTC handle.
Return value:
None
RTC Digital Calib Definitions
RTC_CALIBSIGN_POSITIVE
RTC_CALIBSIGN_NEGATIVE
Private macros to check input parameters
IS_RTC_BKP
IS_TIMESTAMP_EDGE
IS_RTC_TAMPER_PIN
IS_RTC_TIMESTAMP_PIN
IS_RTC_TAMPER_TRIGGER
IS_RTC_WAKEUP_CLOCK
IS_RTC_WAKEUP_COUNTER
IS_RTC_CALIB_SIGN
IS_RTC_CALIB_VALUE
IS_RTC_TAMPER