ST STM32F2 User Manual

UM1940
LL ADC Generic Driver
DocID028236 Rev 2
775/1371
polarity set to both rising and falling edges
ADC group regular - Trigger source
LL_ADC_REG_TRIG_SOFTWARE
ADC group regular conversion trigger internal:
SW start.
LL_ADC_REG_TRIG_EXT_TIM1_CH1
ADC group regular conversion trigger from
external IP: TIM1 channel 1 event (capture
compare: input capture or output capture).
Trigger edge set to rising edge (default
setting).
LL_ADC_REG_TRIG_EXT_TIM1_CH2
ADC group regular conversion trigger from
external IP: TIM1 channel 2 event (capture
compare: input capture or output capture).
Trigger edge set to rising edge (default
setting).
LL_ADC_REG_TRIG_EXT_TIM1_CH3
ADC group regular conversion trigger from
external IP: TIM1 channel 3 event (capture
compare: input capture or output capture).
Trigger edge set to rising edge (default
setting).
LL_ADC_REG_TRIG_EXT_TIM2_CH2
ADC group regular conversion trigger from
external IP: TIM2 channel 2 event (capture
compare: input capture or output capture).
Trigger edge set to rising edge (default
setting).
LL_ADC_REG_TRIG_EXT_TIM2_CH3
ADC group regular conversion trigger from
external IP: TIM2 channel 3 event (capture
compare: input capture or output capture).
Trigger edge set to rising edge (default
setting).
LL_ADC_REG_TRIG_EXT_TIM2_CH4
ADC group regular conversion trigger from
external IP: TIM2 channel 4 event (capture
compare: input capture or output capture).
Trigger edge set to rising edge (default
setting).
LL_ADC_REG_TRIG_EXT_TIM2_TRGO
ADC group regular conversion trigger from
external IP: TIM2 TRGO. Trigger edge set to
rising edge (default setting).
LL_ADC_REG_TRIG_EXT_TIM3_CH1
ADC group regular conversion trigger from
external IP: TIM3 channel 1 event (capture
compare: input capture or output capture).
Trigger edge set to rising edge (default
setting).
LL_ADC_REG_TRIG_EXT_TIM3_TRGO
ADC group regular conversion trigger from
external IP: TIM3 TRGO. Trigger edge set to
rising edge (default setting).
LL_ADC_REG_TRIG_EXT_TIM4_CH4
ADC group regular conversion trigger from
external IP: TIM4 channel 4 event (capture
compare: input capture or output capture).
Trigger edge set to rising edge (default

ST STM32F2 Specifications

General

Brand	ST
Model	STM32F2
Category	Microcontrollers
Language	English