EasyManua.ls Logo

Still RX50-13 - Page 264

Still RX50-13
374 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5 Operation
Handling the battery
The battery must only be replaced in accor-
dance with the directions in these operating
instructions.
When charging and maintaining the battery,
observe the manufacturer’s maintenance
instructions for the battery and battery
charger.
Fire protection measures
DANGER
Risk of explosion due to flammable
gases!
During charging, the battery releases
a mixture of oxygen and hydrogen
(detonating gas). This gas mixture is
explosive and must not be ignited.
Theremustbenoflammablemate-
rials or spark-forming operating ma-
terials within 2 m of either the truck
when it is parked for charging or the
battery charger.
When working with batteries, take
the following security precautions.
Keep away from open flames and do not
smoke.
Always ensure adequate ventilation in the
vicinity.
Disconnect the battery male connector
before charging and only when the truck
and battery charger are switched off.
The battery door must be open when
charging.
Expose the surfaces of the battery cells.
Do not place any metal objects on the
battery.
Open any protective structures fully (e.g.
fabric-covered cab).
Have fire extinguishing equipment ready.
25
2 55048011501 EN - 12/2015

Table of Contents

Related product manuals