Tektronix TBS2000 Series

F commands
This section lists commands and queries that begin with the letter F.
FACtory
Resets the instrument to its factory default settings. Refer to Appendix B: Factory
Setup for a list of the factory default settings. No query.
This command does the following: •
■
Clears the Event Status Enable Register
■
Clears the Service Request Enable Register
■
Sets the Device Event Status Enable Register to 255
■
Purges all defined aliases
■
Enables all Command Headers
■
Sets the macro defined by *DDT to a "zero-length field
■
Clears the pending operation flag and associated operations
This command does not reset the following:
■
Communication settings
■
Sate of the VXI-11 (Ethernet IEEE Std 488.2) interface
■
Calibration data that affects device specifications
■
Protected user data
■
Stored settings
■
Power On Status Clear Flag
■
instrument password
Group
Save and Recall
Syntax
FACtory
TBS2000 Series Programmer 119