Tektronix TBS2000 Series User Manual

SELect:CH<x>
Turns the display of the channel <x> waveform on or off, where <x > is the
channel number. This command also resets the acquisition. The query returns
whether the channel is on or off but does not indicate whether it is the selected
waveform.
Group
Vertical
Syntax
SELect:CH<x> {ON|OFF|<NR1>}
SELect:CH<x>?
Arguments
ON turns on the display of the specified waveform. This waveform also becomes
the selected waveform.
OFF turns off the display of the specified waveform.
<NR1> = 0 turns off the display of the specified waveform; any other value turns
on the display of the specified waveform.
Examples
SELECT:CH2 ON turns the channel 2 waveform display on, and selects channel
2.
SELECT:CH1? might return :SELECT:CH1 1 indicating that channel 1 is being
displayed.
S commands
212 TBS2000 Series Programmer

Tektronix TBS2000 Series Specifications

General

Brand	Tektronix
Model	TBS2000 Series
Category	Test Equipment
Language	English