CH<x>:PRObe:ID?
Returns the type and serial number of the probe attached to channel <x>, where x
is the channel number. Query only.
Group
Vertical
Syntax
Examples
CH2:PROBE:ID? might return :CH2:PROBE:ID:TYPE "10X";SERNUMBER
"N/A" indicating that a passive 10x probe of unknown serial number is attached
to channel 2.
CH<x>:PRObe:ID:SERnumber?
Returns the serial number of the probe attached to channel <x>, where x is the
channel number. Query Only.
NOTE. For Level 0 and 1 probes, the serial number will be "".
Group
Vertical
Syntax
CH<x>:PRObe:ID:SERnumber?
Examples
CH1:PROBE:ID:SERNUMBER? might return :CH1:PROBE:ID:SERNUMBER
"B010289" indicating that the serial number of the probe attached to channel 1 is
B010289.
C commands
70 TBS2000 Series Programmer
To Next Page
Loading...
