WAVFrm?
Returns WFMOutpre? and CURVe? data for the waveform as specified by the
DATA:SOUrce command. This command is equivalent to sending both
WFMOutpre? and CURVe?, with the additional provision that the response to
WAVFrm? is guaranteed to provide a synchronized preamble and curve. The
source waveform, as specified by :DATA:SOURCE, must be active or the query
will not return any data and will generate an error indicator. Query only.
Group
Waveform
Syntax
WAVFrm?
Related Commands
CURVe on page 87, DATa:SOUrce on page 91, WFMOutpre? on page 257
Returns
See WFMPre? and CURVe? commands.
WFMInpre?
Returns the waveform formatting and scaling specifications to be applied to the
next incoming CURVe command data. Query only.
Group
Waveform
Syntax
WFMInpre?
Related commands
CURVe on page 87, DATa:SOUrce on page 91, WFMOutpre? on page 257
W commands
248 TBS2000 Series Programmer
To Next Page
Loading...
