RISe is the rise time between 10% and 90% of the first rising edge of the
waveform or gated region. Rising edge must be displayed to measure. The
instrument automatically calculates the 10% and 90% measurement points.
RMS amplitude measurement finds the true Root Mean Square voltage in the
entire waveform or gated region.
Examples
MEASUREMENT:MEAS2:TYPE FREQUENCY specifies MEAS2 to measure
the frequency of a waveform.
MEASUREMENT:MEAS2:TYPE? might
return :MEASUREMENT:MEAS1:TYPE RMS indicating that measurement 1 is
defined to measure the RMS value of a waveform.
MEASUrement:MEAS<x>:UNIts?
Returns the units for the instrument measurement specified by
MEASUrement:MEAS<x>:TYPe. Where <x> identifies the measurement,
1 through 6. Query only.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:UNIts?
Related commands
MEASUrement:MEAS<x>:TYPe on page 186, MEASUrement:IMMed:UNIts? on
page 180
Returns
<QString> returns the units for the measurement.
M commands
TBS2000 Series Programmer 189
To Next Page
Loading...
