Tektronix TBS2000 Series User Manual

ACQuire:NUMACq?
Indicates the number of acquisitions that have taken place since starting
instrument acquisition. The acquisition number will continue to increase while
acquisitions are running until there is a reset.
Starting and stopping acquisitions do not cause this number to reset. For example,
if acquisitions are running, the acquisition count will increase (assuming the
instrument is triggering). If you stop the acquisitions, the acquisition number will
freeze at a given number (For example: 5000). If you start acquisitions again, it
will continue from 5000. The number will reset to 0 only if you change the
horizontal scale while acquisitions are running.
Group
Acquisition
Syntax
ACQuire:NUMACq?
Related commands
ACQuire:STATE on page 41
Returns
<NR1>
Examples
ACQuire:NUMACq? might return ACQUIRE:NUMACQ 350 indicating that
350 acquisitions have occurred.
A commands
40 TBS2000 Series Programmer

Tektronix TBS2000 Series Specifications

General

Brand	Tektronix
Model	TBS2000 Series
Category	Test Equipment
Language	English