Syntax
CH<x>:POSition <NR3>
CH<x>:POSition?
Related commands
CH<x>:OFFSet on page 63REF<x>:VERTical:POSition? on page 203MATH:
VERtical:POSition on page 169
Arguments
<NR3> is the position in divisions from the center graticule for the specified
channel. The range is 5 to -5 divisions.
Examples
CH2:POSITION 1.3E0 positions the channel 2 input signal 1.3 divisions above
the center of the display.
CH1:POSITION? might return :CH1:POSITION -1.3000 indicating that the
vertical position of Channel 1 is 1.3 divisions below the center graticule.
CH<x>:PRObe
Returns all information concerning the probe attached to channel <x>, where x is
the channel number. The value of <x> can vary from 1 through 4 depending on
the instrument model.
Group
Vertical
Syntax
CH<x>:PRObe?
Examples
CH1:PROBE? might return CH1:PROBE 10.
C commands
TBS2000 Series Programmer 65
To Next Page
Loading...
