Tektronix TBS2000 Series User Manual

Arguments
<NR3> specifies the range from 1 (or 2) ns to 100 s, depending on the model.
Examples
HORIZONTAL:SECDIV 2E-6 sets the delay scale to 2μs per division.
HORIZONTAL:SECDIV ? might return :HORIZONTAL:DELAY:SECDIV
2.0000E-06 indicating that the delay scale is currently set to 2 μs per division.
HORizontal:DIVisions
Returns the current horizontal divisions: 15.0000. Query only.
Group
Horizontal
Syntax
HORizontal:DIVisions?
Examples
HORizontal:DIVisions? might return HORizontal:DIVisions 15.
HORizontal[:MAIn][:DELay]:POSition
Sets or queries the horizontal position. If Horizontal Delay Mode is turned off,
this command is equivalent to adjusting the HORIZONTAL POSITION knob on
the front panel. When Horizontal Delay Mode is on, this command stores a new
horizontal position that is used when Horizontal Delay Mode is turned off.
Group
Horizontal
Syntax
HORizontal:MAIn:DELay:POSition <NR1>
HORizontal:MAIn:DELay:POSition?
HORizontal:MAIn:POSition <NR1>
HORizontal:MAIn:POSition?
HORizontal:DELay:POSition <NR1>
HORizontal:DELay:POSition?
HORizontal:POSition <NR1>
HORizontal:POSition?
H commands
TBS2000 Series Programmer 151

Tektronix TBS2000 Series Specifications

General

Brand	Tektronix
Model	TBS2000 Series
Category	Test Equipment
Language	English