WFMOutpre:ENCdg
Sets and queries the type of encoding for outgoing waveforms.
Group
Waveform
Syntax
WFMOutpre:ENCdg {ASCii|BINary}
WFMOutpre:ENCdg?
Related commands
WFMOutpre:BYT_Nr on page 259, WFMOutpre:BIT_Nr on page 258
Arguments
ASCii specifies that the outgoing data is to be in ASCII format. Waveforms will
be sent as <NR1> numbers.
BINary specifies that outgoing data is to be in a binary format whose further
specification is determined by WFMOutpre:BYT_Nr, WFMOutpre:BIT_Nr,
WFMOutpre:BN_Fmt and WFMInpre:FILTERFreq.
Examples
WFMOutpre:ENCdg ASCii sets the encoding to ASCII.
WFMOutpre:ENCdg? might return WFMOutpre:ENCdg BINARY indicating the
encoding is set to binary.
W commands
260 TBS2000 Series Programmer
To Next Page
Loading...
