Related commands
DATa:SOUrce on page 91
Examples
WFMOUTPRE:XUNIT? might return :WFMOUTPRE:XUNIT "HZ" indicating
that the horizontal units for the waveform are in Hertz.
WFMOutpre:XZEro?
Returns the time coordinate of the first point in the outgoing waveform. This
value is in units of WFMOutpre:XUNit?. The query command will time out and
an error will be generated if the waveform specified by DATa:SOUrce is not
turned on. Query only.
Group
Waveform
Syntax
WFMOutpre:XZEro?
Related commands
DATa:SOUrce on page 91, WFMOutpre:XUNit? on page 263
Examples
WFMOUTPRE:XZERO? might return :WFMOUTPRE:XZERO 5.6300E-9
indicating that the trigger occurred 5.63 ns before the first sample in the
waveform record.
W commands
264 TBS2000 Series Programmer
To Next Page
Need help?
General
