Tektronix TBS2000 Series

SELect:MATH
Turns on and off the display of the math waveform. The query returns whether
the math waveform is on or off but does not indicate whether it is the selected
waveform.
Group
Vertical
Syntax
SELect:MATH {ON|OFF|<NR1>}
SELect:MATH?
Arguments
ON turns on the display of the specified waveform. This waveform also becomes
the selected waveform.
OFF turns off the display of the specified waveform.
<NR1> = 0 turns off the display of the specified waveform; any other value turns
on the display of the specified waveform.
Examples
SELECT:MATH ON turns the math waveform display on, and selects it.
SELECT:MATH? might return :SELECT:MATH 1 indicating that the math
waveform is being displayed.
S commands
TBS2000 Series Programmer 215