Tektronix TBS2000 Series - Horizontal[:Main]:Delay:state

Examples
HORIZONTAL:DELAY:MODE OFF sets the Horizontal Delay Mode to off,
allowing the HORizontal:POSition command to horizontally position the
waveform.
HORIZONTAL:MAIn:DELAY:MODE? might return
HORIZONTAL:DELAY:MODE OFF indicating that the HORizontal:POSition
command horizontally positions the waveform.
HORizontal[:MAIn]:DELay:STATe
Sets or returns the horizontal delay state . The same as
HORizontal[:MAIn]:DELay:MODe.
Group
Horizontal
Syntax
HORizontal:MAIn:DELay:STATe {OFF|ON|<NR1>}
HORizontal:MAIn:DELay:STATe?
HORizontal:DELay:STATe {OFF|ON|<NR1>}
HORizontal:DELay:STATe?
Related Commands
HORizontal[:MAIn][:DELay]:POSition on page 151
Arguments
OFF sets the Horizontal Delay State to off. This causes the HORizontal:POSition
command to horizontally position the waveform.
ON sets the Horizontal Delay State to on. This causes the command to
horizontally position the waveform.
<NR1> = 0 sets the Horizontal Delay State to off; any other value sets this mode
to on.
Examples
HORIZONTAL:DELAY:STATE OFF sets the Horizontal Delay State to off,
allowing the HORizontal:POSition command to horizontally position the
waveform.
HORIZONTAL:MAIN:DELAY:STATE? might
return :HORIZONTAL:DELAY:State OFF indicating that the
HORizontal:POSition command horizontally positions the waveform.
H commands
TBS2000 Series Programmer 153