Syntax
WFMOutpre:YOFf?
Related commands
DATa:SOUrce on page 91, WFMOutpre:BYT_Nr on page 259
Examples
WFMOUTPRE:YOFF? might return :WFMOUTPRE:YOFF -50.0000E+0
indicating that the position indicator for the waveform was 50 digitizing levels
(2 divisions) below center screen (for 8-bit waveform data).
WFMOutpre:YUNit?
Returns the vertical units for the waveform specified by the DATa:SOUrce
command. The query command will time out and an error will be generated if the
waveform specified by DATa:SOUrce is not turned on. Query only.
Group
Waveform
Syntax
WFMOutpre:YUNit?
Related commands
DATa:SOUrce on page 91
Examples
WFMOUTPRE:YUNIT? might return :WFMOUTPRE:YUNIT "dB" indicating
that the vertical units for the waveform are measured in decibels.
W commands
266 TBS2000 Series Programmer
To Next Page
Loading...
