Tektronix TBS2000 Series

TRIGger:A:PULse:CLAss
Sets or queries the type of pulse on which to trigger.
Group
Trigger
Syntax
TRIGger:A:PULse:CLAss {RUNt|WIDth}
TRIGger:A:PULse:CLAss?
Related commands
TRIGger:A:RUNT? on page 236, TRIGger:A:PULSE:Width? on page 233,
TRIGger:A:TYPe on page 240
Arguments
RUNt triggers when a pulse crosses the first preset voltage threshold but does not
cross the second preset threshold before recrossing the first.
WIDth triggers when a pulse is found that has the specified polarity and is either
inside or outside the specified time limits.
Examples
TRIGGER:A:PULSE:CLASS WIDTH specifies a width pulse for the A trigger.
TRIGGER:A:PULSE:CLASS? might return :TRIGGER:A:PULSE:CLASS
WIDTH indicating that a pulse was found that is of the specified polarity and
width.
T commands
232 TBS2000 Series Programmer