Tektronix TBS2000 Series

MEASUrement:IMMed:SOUrce<x>
For SOURce1: Sets or queries the source for all single channel measurements.
For delay or phase measurements, sets or queries the waveform to measure from.
For SOUrce2: Sets or queries the waveform to measure to when taking a delay
measurement or phase measurement.
Group
Measurement
Syntax
MEASUrement:IMMed:SOUrce<x> {CH1|CH2|CH3|CH4|MATH}
MEASUrement:IMMed:SOUrce<x>?
Arguments
CH1–CH4 or MATH is the source waveform.
Examples
MEASUrement:IMMed:SOUrce1 CH1 sets the immediate measurement source
1 to channel 1.
MEASUrement:IMMed:SOUrce1? might return
MEASUrement:IMMed:SOUrce1 CH1 indicating the immediate measurement
source 1 is channel 1.
MEASUrement:IMMed:TYPe
Sets or queries the immediate measurement type.
Group
Measurement
Syntax
MEASUrement:IMMed:TYPe {AMPlitude|AREa|BURst|CARea|CMEan|CRMs|
DELay|FALL|FREQuency |HIGH|LOW|MAXimum|MEAN|MINImum|NDUty|
NEDGECount|NOVershoot |NPULSECount|NWIdth|PEDGECount|PDUty |
PERIod|PHAse|PK2Pk|POVershoot|PPULSECount|PWIdth|RISe|RMS}
MEASUrement:IMMed:TYPe?
M commands
TBS2000 Series Programmer 177