Syntax
CALibrate:RESults:FACtory?
Examples
CALibrate:RESults:FACtory? might return CALibrate:RESults:FACtory INIT
indicating the instrument has not be calibrated.
CALibrate:RESults:SPC?
Returns the status of the SPC operation. This query does not initiate a SPC.
Query only.
Group
Calibration and Diagnostic
Syntax
CALibrate:RESults:SPC?
Related commands
*CAL? on page 53
Returns
INIT indicates that SPC has never successfully completed.
PASS indicates that the last SPC operation passed.
FAIL indicates that the last SPC operation failed.
RUNNING indicates that the SPC operation is running.
Examples
CALibrate:RESults:SPC? might return :CALibrate:RESults:SPC INIT indicating
SPC has not be run successfully.
C commands
TBS2000 Series Programmer 59
To Next Page
Need help?
General
