SET?
Returns most instrument settings. You can send these responses back to the
instrument to return the instrument to the state it was in when you sent SET. This
query is identical to the *LRN? query. Query only.
NOTE. The SET? query always returns command headers, regardless of the
setting of the HEADer command. This is because the returned data is intended to
be able to be sent back to the instrument as concatenated commands. The
VERBose command can still be used to specify whether the returned headers
should be abbreviated or full length.
Group
Miscellaneous
Syntax
SET?
Related Commands
HEADer on page 141, *LRN? on page 164
Returns
Most instrument settings. See Appendix B: Factory Setup.
Examples
SET? might return a partial string like the following: ACQUIRE:STOPAFTER
RUNSTOP;STATE 1;MODE SAMPLE; NUMAVG 16;:HEADER
1;:VERBOSE 1;:DISPLAY:FORMAT YT;STYLE VECTORS;PERSISTENCE
500.0E-3;CONTRAST 50;:LOCK NONE;:HARDCOPY:FORMAT
EPSON;PORT RS232;LAYOUT PORTRAIT;
S commands
TBS2000 Series Programmer 217
To Next Page
Loading...
Need help?
General
