Related commands
ACQuire:STATE on page 41
Arguments
RUNSTop specifies that the instrument will continually acquire data, if
ACQuire:STATE is turned on.
SEQuence specifies that the next acquisition will be a single-sequence
acquisition.
Examples
ACQuire:STOPAfter RUNSTOP sets the instrument to continually acquire data.
ACQuire:STOPAfter? might return: ACQUIRE:STOPAFTER SEQUENCE
indicating that the next acquisition the instrument makes will be of the single-
sequence type.
ALIas
Sets or queries the state of alias functionality.
Use Alias commands to define new commands as a sequence of standard
commands. You may find this useful when repeatedly using the same commands
to perform certain tasks like setting up measurements. Aliases are similar to
macros but do not include the capability to substitute parameters into alias
bodies.
To use Alias commands, first define the alias, then turn on the alias state.
Group
Alias
Syntax
ALIas {OFF|ON|<NR1>}
ALIas?
A commands
TBS2000 Series Programmer 43
To Next Page
Loading...
Need help?
General
