Tektronix TBS2000 Series

TRIGger:A:PULSEWidth:SOUrce
Sets or queries the source for the pulse width trigger. This is equivalent to setting
the Source option in the Trigger menu.
Group
Trigger
Syntax
TRIGger:A:PULse:SOUrce {CH1|CH2|CH3|CH4|LINE}
TRIGger:A:PULse:SOUrce?
Arguments
CH<x> specifies one of the analog input channels. The value of <x> can be
1 through 4 on four channel instruments, or 1 or 2 on two channel instruments.
LINE specifies AC line voltage.
Examples
TRIGGER:A:PULSEWIDTH:SOURCE CH1 sets channel 1 as the pulse width
source.
TRIGGER:A:PULSEWIDTH:SOURCE? might
return :TRIGGER:A:PULSEWIDTH:SOURCE CH1 indicating that channel 1 is
the pulse width source.
TRIGger:A:PULse:WIDth:WHEN
Sets or queries whether to trigger on a pulse that meets, falls outside, or within
the specified range of limits. This is equivalent to setting the When option in the
Pulse Trigger menu.
Group
Trigger
T commands
234 TBS2000 Series Programmer