Tektronix TBS2000 Series User Manual

WFMOutpre:BYT_Nr
Sets or queries the data width for the outgoing waveform specified by the
DATa:SOUrce command. Changing WFMOutpre:BYT_Nr also changes
WFMOutpre:BIT_Nr and DATa:WIDth.
Group
Waveform
Syntax
WFMOutpre:BYT_Nr <NR1>
WFMOutpre:BYT_Nr?
Related commands
DATa:SOUrce on page 91, DATa:WIDth on page 94, WFMOutpre:BIT_Nr on
page 258
Arguments
<NR1> is the number of bytes per data point and can be 1 or 2.
Examples
WFMOUTPRE:BYT_NR 1 sets the number of bytes per outgoing waveform data
point to 1, which is the default setting.
WFMOUTPRE:BYT_NR? might return :WFMOUTPRE:BYT_NR 2 indicating
that there are 2 bytes per outgoing waveform data point.
W commands
TBS2000 Series Programmer 259

Tektronix TBS2000 Series Specifications

General

Brand	Tektronix
Model	TBS2000 Series
Category	Test Equipment
Language	English