Tektronix TBS2000 Series

WFMInpre:XINcr
Sets or queries the horizontal interval between incoming waveform points in
units specified by WFMInpre:XUNit.
Group
Waveform
Syntax
WFMInpre:XINcr <NR3>
WFMInpre:XINcr?
Arguments
<NR3> is the interval between points in the waveform record, in the units
specified by WFMPre:XUNit.
Examples
WFMINPRE:XINCR 3E-3 sets the interval between incoming waveform points
to 3 ms.
WFMINPRE:XINCR ? might return :WFMINPRE:XINCR 1.0000E-3 indicating
that if WFMInpre:XUNit is set to "s", there is a 1 ms interval between incoming
waveform points.
WFMInpre:XUNit
Sets or queries the horizontal units of the incoming waveform.
Group
Waveform
Syntax
WFMPre:XUNit <Qstring>
WFMPre:XUNit?
W commands
252 TBS2000 Series Programmer