Tektronix TBS2000 Series - Trigger:a:pulse:width:width

Syntax
TRIGger:A:PULse:WIDth:WHEN {LESSthan|MOREthan|EQual|UNEQual}
TRIGger:A:PULse:WIDth:WHEN?
Related commands
TRIGger:A:PULse:WIDth:WIDth on page 235
Arguments
LESSthan sets the instrument to trigger if a pulse is detected with width less than
the time set by the TRIGger:A:PULSEWidth:WIDth command.
MOREthan sets the instrument to trigger if a pulse is detected with width more
than the time set by the TRIGger:A:PULSEWidth:WIDth command.
EQUal sets the instrument to trigger if a pulse is detected with width equal to the
time period specified in TRIGger:A:PULSEWidth:WIDth within a ±5%
tolerance.
UNEQual sets the instrument to trigger if a pulse is detected with width greater
than or less than (but not equal) the time period specified in
TRIGger:A:PULSEWidth:WIDth within a ±5% tolerance.
Examples
TRIGGER:A:PULSEWIDTH:WHEN LESSTHAN specifies that the duration of
the A pulse will fall within defined high and low limits.
TRIGGER:A:PULSEWIDTH:WHEN? might
return :TRIGGER:A:PULSEWIDTH:WHEN LESSTHAN indicating that the
conditions for generating a width trigger.
TRIGger:A:PULse:WIDth:WIDth
Sets or queries the width setting for the pulse width trigger. This is equivalent to
setting the Width option by using the Pulse Trigger menu and the TRIGGER
knob.
Group
Trigger
T commands
TBS2000 Series Programmer 235