SAVe:WAVEform
Stores a waveform in one of the nonvolatile reference memory locations. This
command is equivalent to selecting the Save Waveform option in the Save/Recall
Waveform menu. Only individual analog waveforms (CH<x>, MATH, FFT ) can
be saved to reference memory locations. Command only, no query form.
You can save a specified waveform or waveforms to a single CSV file when the
SAVE:WAVEFORM:FILEFORMAT is set to SPREADSHEET.
You can save a specified waveform or waveforms to consecutive ISF (internal
save format) files when the SAVE:WAVEFORM:FILEFORMAT is set to
INTERNAL.
Group
Save and Recall
Syntax
SAVe:WAVEform[<wfm>,{REF<x>}] | [REF<x>, <QString>]
Related commands
RECAll:WAVEForm on page 199, SAVe:WAVEform:FILEFormat on page 211
Arguments
<wfm>, <REF<x> saves the specified waveform to the specified reference
memory location. <wfm> can be any live analog channel (where <x> is the
channel number), the MATH waveform, or FFT waveform. <wfm>, <QString>
saves the specified waveform to the file specified in the quoted string argument.
Any live channel (such as CH1), the MATH waveform, the FFT waveform, or
any reference waveform can be saved to a file.
REF<x> is one of the allowable reference waveform storage locations.
<file path> is a quoted string that defines the path and name of the waveform file
to save. Use the extension .CSV for saved waveform files. Waveform data is
saved as self-documented comma-separated ASCII values.
S commands
210 TBS2000 Series Programmer
To Next Page
Loading...
Need help?
General
