Tektronix TBS2000 Series User Manual

Arguments
<NR1> represents the supported values for horizontal record lengths.
Examples
HORizontal:RESOlution 200000 set the record length to 200000 points.
HORizontal:ROLL
Returns the current horizontal roll mode state: on/off. Query only.
Group
Horizontal
Syntax
HORizontal:ROLL?
Examples
HORizontal:ROLL? might return HORizontal:ROLL ON indicating that roll
mode is on.
HORizontal:TRIGger:POSition
Sets or queries the horizontal position when delay mode is OFF. It is similar to
HORizontal:POSition.
Sets the
Group
Horizontal
Syntax
HORizontal:TRIGger:POSition <NR3>
HORizontal:TRIGger:POSition?
Arguments
<NR3> is the horizontal position expressed as the percentage of the waveform
displayed left of the center of the graticule.
Examples
HORizontal:MAIn:POSition50 sets the horizontal position to 50%.
HORizontal:MAIn:POSition? might return 100, indicating that the horizontal
position is set to 100%.
H commands
TBS2000 Series Programmer 159

Tektronix TBS2000 Series Specifications

General

Brand	Tektronix
Model	TBS2000 Series
Category	Test Equipment
Language	English