Tektronix TBS2000 Series

HORizontal[:MAIn]:DELay:TIMe
Sets or queries the horizontal delay time. The amount of time the acquisition is
delayed depends on sample rate and record length.
Group
Horizontal
Syntax
HORizontal:MAIn:DELay:TIMe <NR3>
HORizontal:MAIn:DELay:TIMe?
HORizontal:DELay:TIMe <NR3>
HORizontal:DELay:TIMe?
Arguments
<NR3> is the delay in seconds.
Examples
HORizontal:DELay:TIME 0.3 sets the delay of acquisition data so that the
resulting waveform is centered 300 ms after the trigger occurs.
HORizontal[:MAIn]:SAMPLERate
Returns the current horizontal sample rate. Query only.
Group
Horizontal
Syntax
HORizontal:SAMPLERate?
HORizontal [:MAIn] :SAMPLERate?
Examples
HORizontal:SAMPLERate? might return HORizontal:SAMPLERate 2.0000E+9.
H commands
154 TBS2000 Series Programmer