Tektronix TBS2000 Series User Manual

Zoom command group
These commands support the zoom feature.
Table 26: Zoom commands
Command Description
ZOOM? on page 269 Returns the current horizontal positioning and
scaling of the display.
ZOOM:ZOOM1:STATE on page 274 Sets or queries the zoom on/off state.
ZOOm:ZOOM1? on page 270 Returns the current horizontal positioning and
scaling of the display
ZOOM:ZOOM1:FACtor on page 271 Sets or queries the zoom factor of a particular
zoom box.
ZOOM:ZOOM1:HORizontal:POSition on
page 271
Sets or queries the horizontal position of a
particular zoom box.
ZOOM:ZOOM1:HORizontal:SCAle on page 272 Sets or queries the horizontal zoom scale of the
specified waveform in the specified zoom.
ZOOm:ZOOM1:POSition on page 273 Sets or returns the horizontal zoom position for
the specified waveform in the specified zoom
ZOOm:ZOOM1:SCAle on page 273 Sets or returns the horizontal zoom scale of the
specified waveform in the specified zoom
ZOOM:ZOOM1:STATE on page 274 Specifies or returns a trace as zoomed, on or
off.
Command groups
TBS2000 Series Programmer 35

Tektronix TBS2000 Series Specifications

General

Brand	Tektronix
Model	TBS2000 Series
Category	Test Equipment
Language	English