Syntax
TIMe <QString>
TIMe?
Related commands
DATE on page 95
Arguments
<QString> is a time in the form "hh:mm:ss" where hh refers to a two-digit hour
number, mm refers to a two-digit minute number from 00 to 59, and ss refers to a
two-digit second number from 00 to 59.
Examples
TIME "14:00:00" sets the time to exactly 2:00 p.m.
TIME? might return :TIME "11:25:03" indicating that the current time is set to
11:25 a.m. and 03 seconds.
TRIGger
Forces a trigger event to occur. No query form.
Group
Trigger
Syntax
TRIGger FORCe
Arguments
FORCe creates a trigger event. If TRIGger:STATE is READy, the acquisition
will complete; otherwise this command is ignored.
Examples
TRIGgerFORCE forces a trigger event to occur.
T commands
222 TBS2000 Series Programmer
To Next Page
Loading...
