TP-Link T2600G-28TS - Page 28

8
 Login Local Mode
Firstly, configure the Telnet login mode as “login local” in the prompted DOS screen shown in
Figure 1-3.
Figure 1-3 Configure login local mode
Now, you can logon by Telnet in login local mode.
1. Make sure the switch and the PC are in the same LAN. Click Start and type in cmd in the
Search programs and files window and press the Enter button.
Figure 1-4 Run Window
2. Type telnet 192.168.0.1 in the command prompt shown as Figure 1-5, and press the Enter
button.
Figure 1-5 Connecting to the Switch