TP-Link T2600G-28TS - 4.2 User Management

10
Now, you can logon by Telnet in login mode:
1. Make sure the switch and the PC are in the same LAN. Click Start and type in cmd in the
Search programs and files window and press the Enter button.
Figure 1-9 Run Window
2. Type telnet 192.168.0.1 in the command prompt shown as Figure 1-10, and press the Enter
button.
Figure 1-10 Connecting to the Switch
3. You are prompted to enter the connection password 456 you have set through Console port
connection, and then you are in User EXEC Mode.
Figure 1-11 Enter into the User EXEC Mode