EasyManua.ls Logo

YASKAWA A1000

YASKAWA A1000
628 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
C.9 MEMOBUS/Modbus Data Table
YASKAWA ELECTRIC SIEP C710616 27G YASKAWA AC Drive A1000 Technical Manual 563
MEMOBUS/Modbus
Communications
C
00C0H
Fault contents 3
bit 1 DC Bus Undervoltage (Uv1)
bit 2 Control Power Supply Undervoltage (Uv2)
bit 3 Undervoltage 3 (Soft-Charge Bypass Circuit Fault) (Uv3)
bit 4 Output Short-Circuit or IGBT Fault (SC)
bit 5 Ground Fault (GF)
bit 6 Overcurrent (oC)
bit 7 Drive Overheat Warning (ov)
bit 8 Heatsink Overheat (oH)
bit 9 Overheat 1 (oH1)
bit A Motor Overload (oL1)
bit B Drive Overload (oL2)
bit C Overtorque Detection 1 (oL3)
bit D Overtorque Detection 2 (oL4)
bit E Dynamic Braking Transistor Fault (rr)
bit F Braking Resistor Overheat (rH)
00C1H
Fault contents 4
bit 0 External Fault at input terminal S3 (EF3)
bit 1 External Fault at input terminal S4 (EF4)
bit 2 External Fault at input terminal S5 (EF5)
bit 3 External Fault at input terminal S6 (EF6)
bit 4 External Fault at input terminal S7 (EF7)
bit 5 External Fault at input terminal S8 (EF8)
bit 6 Internal Fan Fault (FAn)
bit 7 Overspeed (os)
bit 8 Speed Deviation (dEv)
bit 9 PG Disconnected (PGo)
bit A Input Phase Loss (PF)
bit B Output Phase Loss (LF)
bit C Motor Overheat (PTC input) (oH3)
bit D External Digital Operator Connection Fault (oPr)
bit E EEPROM Write Error (Err)
bit F Motor Overheat Fault (PTC input) (oH4)
00C2H
Fault contents 5
bit 0 MEMOBUS/Modbus Communication Error (CE)
bit 1 Option Communication Error (bUS)
bit 2, 3 Reserved
bit 4 Control Fault (CF)
bit 5 Zero Servo Fault (SvE)
bit 6 Option External Fault (EF0)
bit 7 PID Feedback Loss (FbL)
bit 8 Undertorque Detection 1 (UL3)
bit 9 Undertorque Detection 2 (UL4)
bit A High Slip Braking Overload (oL7)
bit B to E Reserved
bit F Hardware Fault (includes oFx)
00C3H
Fault contents 6
bit 0 Reserved
bit 1 Z Pulse Fault (dv1)
bit 2 Z Pulse Noise Fault Detection (dv2)
bit 3 Inversion Detection (dv3)
bit 4 Inversion Prevention Detection (dv4)
bit 5 Output Current Imbalance (LF2)
bit 6 Pullout Detection (STo)
bit 7 PG Hardware Fault (PGoH)
bit 8 MECHATROLINK Watchdog Timer Error (E5)
bit 9 Reserved
bit A Too many speed search restarts (SEr)
bit B to F Reserved
Register No. Contents

Table of Contents

Other manuals for YASKAWA A1000

Related product manuals