YASKAWA DX100 - Page 132

8 System Setup
DX100 8.6 Interference Area
8-67
 Number Input of the Axis Data Coordinates
1. Select “METHOD”.
(1) Each time [SELECT] is pressed, “MAX/MIN” and “CENTER POS”
switch alternately.
(2) Select “MAX/MIN”.
2. Input number for “MAX” and “MIN” data and press [ENTER].
– The axis interference area is set.
长沙工控帮教育科技有限公司
工控帮助教小舒QQ:2823408167