YASKAWA DX100 - Using a Forklift to Move the Controller

3 Installation
DX100 3.1 Handling Procedure
3-2
3.1.2 Using a Forklift to Move the Controller
Observe the following precautions when using a forklift to handle the
controller:
• Confirm that there is a safe work environment and that the DX100
can be transported safely to the installation site.
• Inform people along the forklift route that equipment is being moved
in their area.
• Secure the controller so it cannot shift or fall during handling.
• Transport the controller at the lowest possible height.
• Avoid jarring, dropping, or hitting the controller during handling.
• When carrying the controller, operate the forklift at a safe speed.
Protective padding
Palette
Forklift
Tiedown straps
长沙工控帮教育科技有限公司
工控帮助教小舒QQ:2823408167