YASKAWA DX100 - Backup by CMOS.BIN; CMOS.BIN Save

9 System Backup
DX100 9.2 Backup by CMOS.BIN
9-3
9.2 Backup by CMOS.BIN
Perform the backup by CMOS.BIN in the maintenance mode.
The chart below shows the availability of CMOS save/CMOS load in each
security mode in the maintenance mode.
9.2.1 CMOS.BIN Save
Follow the procedures below to save CMOS.BIN.
1. Turn ON the DX100 power supply while pressing [MAIN MENU].
2. Insert a CompactFlash into the CompactFlash slot on the
programming pendant.
– when USB memory is used instead of CompactFlash, mount the
USB memory and select {DEVICE} → ”USB: PENDANT”
3. Select {FD/PC CARD} under the main menu.
– The sub menu appears.
4. Select {SAVE}.
Security CMOS Save CMOS Load
Operation Mode XX
Editing Mode OX
Management Mode OO
Yaskawa Mode OO
长沙工控帮教育科技有限公司
工控帮助教小舒QQ:2823408167