YASKAWA DX100 - Changing the Parameter Setting

8 System Setup
DX100 8.17 Changing the Parameter Setting
8-116
8.17 Changing the Parameter Setting
The parameter settings can be changed only by the operator who has the
correct user ID number for the management mode.
1. Select {PARAMETER} under the main menu.
2. Select the parameter type.
– The PARAMETER window appears. Select the desired parameter.
3. Move the cursor to the desired parameter number.
– When the desired parameter number is not in the current window,
move the cursor in the following way:
Decimal Data
Binary Data
长沙工控帮教育科技有限公司
工控帮助教小舒QQ:2823408167