YASKAWA DX100 - Page 135

8 System Setup
DX100 8.6 Interference Area
8-70
 Number Imput of Center Position (WIDTH) and Teaching Center
1. Select “METHOD”.
(1) Each time [SELECT] is pressed, “MAX/MIN” and “CENTER POS”
switch alternately.
(2) Select “CENTER POS”.
2. Input number for “WIDTH” data and press [ENTER].
– “WIDTH” is set.
3. Press [MODIFY]
– A message “Move to the center point and teach” appears.
长沙工控帮教育科技有限公司
工控帮助教小舒QQ:2823408167